LIFTMAX™ Sling
LIFTMAX™ is an HMPE rope sling for heavy lifting, made from 12-strand braided high-modulus polyethylene fiber rope. Its high strength-to-weight ratio reduces rigging weight, while the flexible, torque-neutral construction supports handling and positioning during lifting operations.
Available in single-leg and grommet configurations, LIFTMAX™ can be supplied with a braided polyester or HMPE jacket for additional abrasion protection. The jacket protects the load-bearing rope without carrying the lifting load. Applications include offshore module installation, subsea equipment deployment, wind energy component handling, shipyard lifts, and salvage recovery. Sling size, length, connection details, and protection are selected for the lifting arrangement, with rated capacity established for the specified hitch, sling angles, and operating conditions.
- Type I: LIFTMAX™ Sling
- Construction: 12-Strand
- Materials: HMPE
- Type II: LIFTMAX™ Sling With Jacket
- Construction: 12-Strand With Jacket
- Materials: Core - HMPE, Jacket - Polyester or HMPE
FEATURES
core density
0.97g/cm³
Buoyancy
floating
water absorption
no
Maximum Working Temperature
70℃
elongation
3-4%
Wear Resistance
excellent
Chemical Resistance
excellent
UV Resistance
excellent
BENEFITS
- High Strength, Low Rigging Weight: HMPE rope provides high tensile strength at low weight, reducing the weight crews need to handle when positioning and connecting the sling.
- Flexible Handling: The pliable rope construction makes the sling easier to maneuver around lifting points and through compatible rigging hardware.
- Torque-Neutral Construction: The balanced 12-strand braid helps limit torque generated by the sling under tension.
- Matched-Length Capability: Length tolerances of ±1% of nominal length or better support matched sling sets for planned lifting arrangements.
- Optional Core Protection: A braided polyester or HMPE jacket helps protect the load-bearing rope from external abrasion.
APPLICATIONS
- Offshore Module Installation
- Subsea Equipment Deployment
- Wind Energy Components Handling
- Shipyard and Port Heavy Lifting
- Onshore Equipment Installation
- Salvage and Recovery Lifting
Sling Selection and Rigging Requirements
Select the sling by its working load limit (WLL) for the intended hitch and sling angles. Minimum breaking load (MBL) is not the allowable lifting load.
Connection dimensions, bearing diameter, load contact surfaces, operating temperature, and dynamic loading must be considered together. Offshore and subsea lifts also require assessment of vessel motion and cyclic loading.
Specify any matched-length, proof-load testing, identification, and documentation requirements when requesting a quotation.
FEATURED CASES
